Trigger Wheels
Universal Trigger wheels
Universal 36-1 toothed trigger wheels

All our trigger wheels are laser cut from 5mm steel for the best possible sensor pickup and are compatible with the following systems:

 You can see below how clean the finish of the laser cut parts are.

You may also like to take a look at our range of Engine-specific trigger wheels.

!

Ring gear style trigger wheel

UniRing
Ring gear trigger wheel

Ring gear style trigger wheel

 

Universal 36-1 Trigger wheel availiable in a range of sizes from 4.5" up to 10.25"

Wheel size Wheel Outer Diameter Hole Inner Diameter
4.5" wheel with 3.5" hole 114mm 89mm 
5.125" wheel with 4" hole 130mm 101mm
5.75" wheel with 4.5" hole 146mm 114mm
6.5" wheel with 5.25" hole  165mm  133mm
7.25" wheel with 5.75" hole 184mm

146mm

8.25" wheel with 6.5" hole  210mm  165mm
9.25" wheel with 7.5" hole  235mm  190mm
10.25" wheel with 8.25" hole  260mm  210mm

Trigger wheel with 1/2 pilot hole

UniWheel
Pilot hole wheel

Universal 36-1 Trigger wheel with 1/2" pilot hole.  Availiable in a range of sizes from 2.5" up to 12" (63-300mm pilot hole 12.7mm).

If your crank pulley is dished then you may like to consider using our shim kit to assist spacing out the trigger wheel.

3.5" Trigger wheel with 1/4" pilot hole

575solid
Universal 36-1 Trigger wheel with a 1/4" pilot hole

Universal 36-1 Trigger wheel availiable in 3.5" diameter (89mm diameter, 6mm pilot hole)

Trigger wheel with 5mm pilot hole

575solid
Universal 36-1 Trigger wheel with a 5mm pilot hole

Universal 36-1 Trigger wheel availiable in a range of sizes from 2" to 3"

5.75" lightweight trigger wheel

Lightweight wheel
 5.75" lightweight wheel with pilot hole and adjustment slots.

Slots are located on a 2.5" diameter whilst the central hole of this wheel is 1.5".  All the teeth are supplied in place on this wheel for you to remove the appropriate one.

 

5mm thick spacer

Spacer
5mm thick with 1/2" pilot hole